List price:

1'398.00 CHF

1'287.65 EUR *
1'428.57 USD *

Terms of sale and delivery:

Prices listed are EXW Zurich (Incoterms 2010), excl. packing.
This price list replaces all previously published lists.
Prices are subject to change without notice.
Minimum order value: 150.00 CHF.

Pricing is in CHF.
Prices marked with an asterisk (*) in EUR & USD are for reference only.

Exchange rates:
1.0857 EUR/CHF
0.9786 USD/CHF

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.

Sample Plate for Direct Current Heating

Product code: SHOMDC(N)

For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating. SHOMDC(N) sample holders are made of Molybdenum and Al2O3. The sample is secured by two Mo strips.

One side of the sample is premanently grounded with metallic (Mo) spacers.

The alternative is the SHOMDC - it's contact rails are electrically isolated by Al2O3 washers.

RECOMDC provides the necessary receiver with isolated contact rails for attaching wires.

Specifications: Sample Plate for Direct Current Heating

minimum sample size (l x w x h): 8 x 1 x 0.2mm
maximum sample size (l x w x h): 11 x 3.5 x 0.5mm
Material: Molybdenum, Al2O3
max. temperature: The maximum temperature depends on the material and shape of the actual sample
one side of the sample permanently grounded with metallic (Mo) spacers

Download drawing (pdf)

3D-model available on request.

Compatibility

The SHOMDC(N) Sample Plate for Direct Current Heating suits the following products:

List price:

988.00 CHF

910.01 EUR*
1'009.61 USD*

Grabber Tool ID 8mm for SHOM Plates

Product code: GRABSHOM

Tool for grabbing and handling SHOM flag style sample plates, using either a single shaft linear/rotary feedthrough or GMD40/RM40 sample transporter.

List price:

988.00 CHF

910.01 EUR*
1'009.61 USD*

Grabber Tool ID 7mm for SHOM Plates

Product code: GRABSHOM7

Tool for grabbing and handling SHOM flag style sample plates, using a single shaft wobblestick.

List price:

9'877.00 CHF

9'097.36 EUR*
10'092.99 USD*

Direct Current Heater Heater for Flag Style Plates

Product code: HSASM40-MD16-ADCF16TS-TSMDH-HSMDDCOM-XXXX-YYYY

Heater assembly for direct current heating of SHOMDC sample holders. For temperatures up to 1000°C.

List price:

2'315.00 CHF

2'132.26 EUR*
2'365.62 USD*

Orthogonal Pincer for SHOM Flag Style Plates

Product code: PGWMO(OM)

Standard clearance, sample play of +/-8°.
REV: 12.08.2014 UM

List price:

2'990.00 CHF

2'753.98 EUR*
3'055.39 USD*

Parallel Pincer for SHOM Flag Style Plates

Product code: PGWMP(OM)

"UHV-Tweezers" for extremely delicate manipulations. Standard clearance, sample play of +/-8°
REV 19.10.16 JB

List price:

2'990.00 CHF

2'753.98 EUR*
3'055.39 USD*

Hard Grip Parallel Pincer for SHOM Plates

Product code: PGWMP(OMH)

"UHV-Tweezers" for extremely delicate manipulations. Reduced clearance, sample play of +/-2°. Recommended for MDG40 linear-/rotary feedthroughs.
REV 19.10.2016 JB