Sign in

PBN Heating Station for Flag Style Plates with Linear Travel & Rotation


Composed of a PBN pyrolitic boron nitride sample heating stage for SHOM samle holders clamped on an MD16 Linear/Rotary Feedthrough, this fully configured assembly is completely mounted on a DN40CF (2.75") flange, including wiring and electrical feedthrough.

A complete, ready to use solution for sample heating/annealing under UHV conditions up to 1000°C.

Specifications: PBN Heating Station for Flag Style Plates with Linear Travel & Rotation

linear travel X >= 50mm AND <= 450mm; standard 100mm
retracted length Y >= 134mm AND <= 400mm; standard 134mm

  • Distance from flange face to center (or surface) of sample plate: customized
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
  • Linear/Rotary Feedthrough:
    • standard lengths for linear travel: 100mm, 200mm, 300mm, 400mm, 500mm
    • linear force: 30N
    • rotation:
      • angle: +/- 166.75° deg
      • torque: 0.5Nm (1Nm with HT option)
    • bakeout temperature: 150deg C max.
    • pressure range 1E-11mbar to 1000mbar
    • fully UHV compatible materials
  • PBN Heater Assembly:
    • Maximum Temperature: ~1000°C
    • Maximum Power: 120W (40V, 3.0A at ~1000°C)
    • Installed Thermocouple:  K-type (chromel/alumel)
    • fully UHV compatible materials:
      • Screws/ Washers: Molybdenum, stainless steel (grade A4)
      • Mounting Sleeves: Stainless Steel (1.4301)
      • Isolators: Ceramics (Al203)
      • Sample Plate Receiver: Molybdenum
      • Body/ Housing: Molybdenum
      • Boralectric Heater: Pyrolytic boron nitride, pyrolytic graphite
  • Air side cable included:
    • Cable length: 6m
    • Side A: 4-pin industry standard MS air side connector, two K-Type TC pairs
    • Side B:
      • K-Type (chromel/alumel) miniature thermocouple connector
      • 3x safety 4mm banana plugs (red, black & yellow)
  • Packaging included
  • Power Supply: Not included (Recommendation: Power 150W, Voltage Range: 0-50V, Current Range: 0-5A)
  • Controller not included
  • Tolerances:
    • Machined Parts:  ISO 2768-m-K

Downloads:  drawing (pdf)  /  3D model (stp)  / manual HSOMPBN50 (pdf)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024