Sign in

Pincer for Flag Style Plates - Reduced Clearance - for Dual Shaft Wobblestick

Product code: PGWMS(OMH)

The PGWMS pincer family is most commonly used to manipulate flag style plates. A pocket in the pincer jaws encloses the handle of the sample plate in a way that it can not fall out when the pincer is kept closed. The (OMH) version features a reduced play for a firmer grip of the sample.

 

Specifications: Pincer for Flag Style Plates - Reduced Clearance - for Dual Shaft Wobblestick

adds 27.0 to dimension Y of the main product

  • jaw opening: 26°
  • reduced clearance, play of +/-2°
  • bakeout temperature: 200 °C max.
  • material: stainless steel 1.4301, CuBe2

Downloads: drawing (pdf)  /  3D model (stp)

Options and Accessories

List price:

Flag style sample plate

Product code: SHOM

Commonly used flag style plates, available in a variety of materials and customized versions.

See Sample Holders for the full range of related products.

SHOM(ST) - SHOM(CU) - SHOM(CB) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(AL2O3) - SHOM(SH) - SHOM(W) - SHOM(INCONEL)


List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

The SHOM3S flag-style holder is designed with three slots that integrate perfectly with the RECOM3S drawer-style receptacle. These slots ensure precise and consistently reproducible positioning, supported by the receptacle's optimized three-point contact system. Available in various materials and customizable options to meet specific requirements.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)


List price:

186.97 CHF

201.13 EUR*
223.59 USD*

Flag Style Sample Plate, 5xM1.4 / molybdenum

Product code: SHOMT(MO)

Commonly used flag style sample holder with 5x M1.4 screw holes.


List price:

see pricelist below

Example Assembly - Flag-Style Sample Plate Configuration with 5xM1.4 Threads and Leaf Springs

Product code: SHOM4T(MO)

This example assembly combines a commonly used flag-style sample holder with 5x M1.4 threads, leaf springs, and screws. These products facilitate various options for securing samples onto the flag-style sample plate.


List price:

Straight through flag style sample plate

Product code: SHOS

Flag style sample plate, straight through model: available in a variety of materials
SHOS(ST) - SHOS(CU) - SHOS(CB) - SHOS(TI) - SHOS(MO) - SHOS(TA) - SHOS(AL2O3) - SHOS(SH) - SHOS(W) - SHOS(SiC)


List price:

on request

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)0008-0001-0007

For hat shaped single crystals such as the MaTeck K005 with OD=8mm, lip thickness 1mm, sample diameter <7mm


List price:

731.37 CHF

786.76 EUR*
874.64 USD*

Flag Style Holder for Hat Shaped Single Crystals

Product code: SHOMTCH(MO)-0010-0001-0009

For hat shaped single crystals such as the MaTeck K005 with OD=10mm, lip thickness 1mm, sample diameter <9mm


List price:

658.89 CHF

708.79 EUR*
787.96 USD*

Flag Style Sample Plate for Rectangular Single Crystals

Product code: SHOMTCHR(MO)-0007-0007-0001

For stepped square single crystals such as the MaTeck K102 with outline dimensions 7x7mm, lip thickness 1mm, sample size <6x6mm


List price:

1'718.76 CHF

1'848.92 EUR*
2'055.44 USD*

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M


List price:

2'507.18 CHF

2'697.05 EUR*
2'998.30 USD*

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.


List price:

1'574.59 CHF

1'693.84 EUR*
1'883.03 USD*

Sample Plate for Direct Current Heating with Grounding Contact

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

113.00 CHF

121.56 EUR*
135.14 USD*

Jaw Axles replacement kit for Pincer-grip

Product code: SERKPG

Replacement press pins for Ferrovac pincer-grip, including new washers. The revised design eliminates the risk of losing the circlips present in previous versions and is backwards compatible with most older pincers.


Compatibility

The PGWMS(OMH) Pincer for Flag Style Plates - Reduced Clearance - for Dual Shaft Wobblestick suits the following products:

List price:

5'029.00 CHF

5'409.85 EUR*
6'014.11 USD*

Dual Shaft Linear/Rotary Feedthrough

Product code: MDG40-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF.


List price:

5'209.21 CHF

5'603.71 EUR*
6'229.62 USD*

Dual Shaft Linear/Rotary Feedthrough DN40CF with Rotation Lock

Product code: MDG40(RL)-XXXX-YYYY

Incorporate precision and versatility with our magnetically-driven, dual-shaft linear/rotary feedthrough. This advanced DN40CF system boasts an adjustable rotation lock mechanism, ensuring seamless operation.


List price:

5'732.95 CHF

6'167.11 EUR*
6'855.96 USD*

Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.

Standard Stroke: 0100 / 0150 / 0200 / 0250 / 0300mm. Standard retracted length: 0063mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 63mm / max. 200mm


List price:

6'070.84 CHF

6'530.59 EUR*
7'260.03 USD*

High Precision Actuator Dual Shaft Wobblestick DN40CF

Product code: WMG40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.

Standard Stroke: 0100 / 0150 / 0200 / 0250 / 0300mm. Standard retracted length: 0063mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 63mm / max. 200mm


List price:

6'408.74 CHF

6'894.08 EUR*
7'664.12 USD*

Wide Angle Dual Shaft Wobblestick DN40CF

Product code: WMGWA40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with an extra wide angular range of +/-28°.

Standard Stroke: 0100 / 0150 / 0200 / 0250 / 0300mm. Standard retracted length: 0077mm. Continuous rotation.

Customized Stroke: Min. 50mm / max. 700mm. Customized retracted length: Min. 77mm / max. 200mm


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024