Sign in
HomeProjectsReferencesPrivacy PolicyPublicationsContactManuals
Online catalogue and pricelistWobblestick Manipulators WMWobblestick Manipulators WMGPincers and Grippers Wobblestick AccessoriesSample TransportersSample Transporter AccessoriesSample Transporter MotorizationLinear/Rotary FeedthroughsLinear/Rotary AccessoriesLinear/Rotary MotorizationRotary FeedthroughsPort AlignersSample HoldersSample Receivers and -CarriersSample Heating StagesVacuum ChambersUHV SuitcaseUHV Suitcase AccessoriesUHV Suitcase Docking SystemsLoad Lock SystemsNEG-ION pumpsLaboratory EquipmentCryo EquipmentCTDH40
UHV Booster CF40 dewar version with heating coil and temperature sensorCTH40(WT)
UHV Booster CF40 flow through version with heating coil and temperature sensorCRLND40
Liquid Nitrogen Dewar DN40CF with side port DN16CFCRLNDP40
Pressurized Liquid Nitrogen Dewar DN40CF with side port DN16CFCRLNBT1LAPDO
Liquid Nitrogen Basin, 1.5l, 530x162x65 mm for Dove Tail- and Atom Probe Sample HoldersTMPT100S
Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibratedCTD50CAPFOAM
Foam cap for CTD50Multiaxis Boomerax ManipulatorsXY-ManipulatorsXY-Manipulators AccessoriesZ-ManipulatorsZ-Manipulator AccessoriesIn-Vacuum Connectors and WiringELULTP4TCK
Terminal Block for two K-type Thermocouples, Shapal M™ELULTP4TCK(PEEK)
Terminal Block for two K-type Thermocouples, PEEK UPGRADERECOMCREC13(+DB15F)
DB15 female in-vacuum connector for RECOMCREC13 including assemblyIVWCPC10PK10
Crimp and push connector for Pin D=1.0mm, 10/PKIVWCPP10PK10
Crimp and Push Pin D=1.0mm, 10/PKIVWCPC14PK10
Crimp and Push Connector for Pin D=1.4mm, 10/PKIVWCPC17PK10
Crimp and Push Connector for Pin D=1.7mm, 10/PKTMPT100S
Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibratedIVWSC2PK10
Spring Probe Contact, 0.5mm OD, Pack of 10IVWSC2PK100
Spring Probe Contact, 0.5mm OD pack of 100IVWSC13
13 Pin Spring Probe ConnectorIVLPFACU03
Miniature cable AWG 36, OD=0.3mm, PFA jacket, black, 1 meterIVWCOAXEC13UNT1000
Set of 13 coaxial cables, length = 1m, white, OD=0.8mm, PFA (Teflon®), unterminatedFastenersBall-BearingsCF-Cubes and -Components

Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated

Product code: TMPT100S

A Pt100 Sensor for easy and accurate temperature measurements in UHV from -200°C to 200°C. The sensor is glued onto a copper mounting bracket with a thermally conductive, UHV compatible epoxy resin (Epotek H72). Sensors can be mounted either plane-parallel for good thermal contact or in 90° geometry in case of limited space. It is fully UHV compatible and comes with AWG 32 poly-imide isolated phosphorous bronze  four-wire cabling with a standard length of 500mm. Four loose crimp socket connectors for pin diameter 1.5-1.6mm are included.

Specifications: Pt100 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated

  • Pt100 sensor, thin film technology on ceramics/glass substrate
  • mounted to copper bracket using Epotek H72 thermally conductive, UHV compatible epoxy
  • temperature range: -200°C to 200°C
  • tolerance: IEC 60751 F 0.15
  • cable length: 500mm
  • cable: 32 AWG Quad-LeadTM cryogenic wire, phosphorous bronze, polyimide insulation
  • four loose crimp sockets for pin dameter 1.5-1.6mm included
  • fully UHV compatible

Downloads: Sensor Data Sheet (pdf)  /  Drawing (pdf)  /  3D Model (stp)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024