Sign in
About usProjectsVacuum WizardReferencesPrivacy PolicyPublicationsContactJobs - offene Stellen (1)ManualsHome
Online catalogue and pricelistWobblestick Manipulators WMWobblestick Manipulators WMGWobblestick AccessoriesPGWMS(OM)
Straight Pincer for SHOM Flag Style PlatePGWMS(OMH)
Hard Grip Straight Pincer for SHOM Flag Style PlatesPGWMS
Basis Straight Pincer without GroovesPGWMSL(OM)
Long Straight Pincer for SHOM Flag Style PlatesPGWMSL(OMH)
Hard Grip Long Straight Pincer for SHOM Flag Style PlatesPGWMS(VGS)
Straight Pincer Grip for VG-Stub Sample HoldersGRABSHOM7
Grabber Tool ID 7mm for SHOM PlatesPGWMO(OM)
Orthogonal Pincer for SHOM Flag Style PlatesPGHFWMWAF
High Force Pincer for Wafer HandlingPGWMP(OMH)
Hard Grip Parallel Pincer for SHOM PlatesPGWMP(DC)
Parallel Pincer with Isolated JawsPGWMSJTAFM3
Pincer Grip for JT-SPM V3PGWMSJTAFM4
Pincer Grip for JT-SPM V4PGWMS(OMUSLIMLTA)
Straight Pincer Ultra SLIM LT AFM for SHOMADOMO
Adapter for Omicron Pincer Grip SA02-1862 (STM1)ADOMO2
Adapter for Omicron PincerGrip GA02-1810/GA02-1119ADOMS
Adapter for Omicron Straight Pincer Grip GA02-182BP40
Bellows Protection for WobblesticksFRKBS
Straight Fork for Block Style HoldersFRKBSDM
Short Fork for Block Style Holders HEXKEY-M
Hex Key for WobblestickHEXNUT
Hex Nut for Wobblestick SERKWM40
Service Kit for WM40 with a 7mm shaftSERKWM40(S5)
Service Kit for WM40 with a 5mm shaftSERFCYWMG40
Factory change of retracted length for WMG40 WobblestickSERFWMG40
Factory overhaul of WMG40 WobblestickTSWM
Parking-/ Protection Rail for Wobblesticks DN40CFTSWMA
Aligner for Wobblesticks DN40CFTSWMDL(3)
Deflection Limiter (3deg) for Wobblesticks DN40CF TSWMF
Parking-/ Protection Rail for Wobblesticks DN40CF - also for non-horizontal usageTSWMIL
Inline Parking-/ Protection Rail for Wobblesticks DN40CFTSWMLR
Lock Ring for TSWM DN40CFTSWMPA
Tube Support for Wobblestick with angular alignment of the Wobblestick axisTSWMV
Parking-/ Protection Rail for WM DN40CF verticalADWMS5(M4I)
Adapter WM40 with D=5mm shaft from M3 to M4 internal threadADWMS7(M3I)
Adapter WM40 with D=7mm shaft from M4 to M3 internal threadADWMS7(M6I)
Adapter WM40 with D=7mm shaft from M4 to M6 internal threadADWMS7(S70L16PEEK)
PEEK Adapter for WM40, End Piece: D=7mm / L=16mmZLCF63CF40WM
Zero Length Reducing Flange CF63CF40 for WobblesticksLRMD
Lock Ring ID 11 for Linear/Rotary Feedthroughs & WobblesticksSample TransportersSample Transporter AccessoriesSample Transporter MotorizationLinear/Rotary FeedthroughsLinear/Rotary Feedthrough AccessoriesLinear/Rotary Feedthrough MotorizationRotary FeedthroughsSample HoldersSample Receivers and -CarriersPort AlignersLaboratory EquipmentCF-HardwareCF-FlangesIn-Vacuum Connectors and WiringBall-BearingsCryo EquipmentUHV SuitcaseUHV Suitcase AccessoriesDocking SolutionsLoad Lock SystemsNEG pumpsGlove BoxesSpecial OffersSample Heating StagesMultiaxis Boomerax ManipulatorsXY-ManipulatorsZ-ManipulatorsZ-Manipulator AccessoriesXY-Manipulators AccessoriesUHV-SystemsPrecision Contract ManufacturingFastenersIn-Vacuum AccessoriesBakeout equipmentEvaporation Sources

Orthogonal Pincer for SHOM Flag Style Plates

Product code: PGWMO(OM)

The PGWMO(OM)orthogonal pincer grip is 1:1 compatible with the Omicron SA02-1862 gripper for STM1 and similair orthogonally operated sample exchange mechanisms. The pincer grips are made with the appropriate grooves for in-line and perpendicular gripping of the sample plate. Both grooves are made with the necessary clearance to allow dangling of the sample plate. Exact values for the clearance of the sample plate are given in the drawing.

Specifications: Orthogonal Pincer for SHOM Flag Style Plates

adds 9.0 to dimension Y of the main product

  • compatible with SHOM sample plates
  • jaw opening: 8deg
  • bakeout temperature: 200 °C max.
  • material: stainless steel 1.4301, Berylco 25

download drawing

Options

The following is a list of compatible options for PGWMO(OM) Orthogonal Pincer for SHOM Flag Style Plates.

List price:

Flag style sample plate

Product code: SHOM

Commonly used flag style holder SHOM, available in a variety of materials and customized versions.

SHOM(ST) - SHOM(CU) - SHOM(CB) - SHOM(TI) - SHOM(MO) - SHOM(TA) - SHOM(AL2O3) - SHOM(SH) - SHOM(W) - SHOM(SiC)


List price:

on request

Flag style sample plate with 3 slits

Product code: SHOM3S

Commonly used flag style holder SHOM3S with 3 slots for receiver RECOM3S, available in a variety of materials and customized versions.

SHOM3S(ST) - SHOM3S(CU) - SHOM3S(CUBE) - SHOM3S(TI) - SHOM3S(MO) - SHOM3S(TA) - SHOM3S(SH) - SHOM3S(W) - SHOM3S(SiC)


List price:

1'526.00 CHF

1'394.37 EUR*
1'693.11 USD*

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M


List price:

2'226.00 CHF

2'033.99 EUR*
2'469.77 USD*

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.


List price:

185.00 CHF

169.04 EUR*
205.26 USD*

Flag Style Sample Plate, 3xM1.4, Leaf Springs

Product code: SHOM3T(ST)

Flag style sample plate, three threads M1.4, incl. cheesehead screws and leaf springs
Material: stainless steel 1.4301 (AISI 304L)
REV 11.04.2014 UM


List price:

1'381.00 CHF

1'261.88 EUR*
1'532.23 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC

Sample holder featuring two mounting platforms for a semiconductor bar. The two contact rails are electrically isolated by Al2O3 washers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

1'398.00 CHF

1'277.41 EUR*
1'551.09 USD*

Sample Plate for Direct Current Heating

Product code: SHOMDC(N)

Sample holder featuring two mounting platforms for a semiconductor bar. One of the two contact rails is grounded with metallic (Mo) spacers.

Requires RECOMDC sample receiver with two high current electrical contacts.


List price:

on request

Sampleholder Hybride Block style and SHOM

Product code: SHBSOMHM

Compatible with SHBS block style as well as SHOM systems. Materials: Molybdenum, CuBe, Titanium. This particular model has a central gap for applying magnetic field using a horseshoe magnet.


Compatibility

The PGWMO(OM) Orthogonal Pincer for SHOM Flag Style Plates suits the following products:

List price:

4'465.00 CHF

4'079.86 EUR*
4'953.96 USD*

Dual Shaft Linear/Rotary Feedthrough

Product code: MDG40-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF.
REV: 02.12.2010 DvG


List price:

4'625.00 CHF

4'226.06 EUR*
5'131.48 USD*

Dual Shaft Linear/Rotary Feedthrough DN40CF with Rotation Lock

Product code: MDG40(RL)-XXXX-YYYY

Magnetically driven dual shaft linear/ rotary feedthrough with mounting flange DN40CF and rotation lock.
Please select your prefered tube support necessary for rotation lock.


List price:

5'090.00 CHF

4'650.95 EUR*
5'647.40 USD*

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.


List price:

5'390.00 CHF

4'925.07 EUR*
5'980.25 USD*

High Precision Actuator Dual Shaft Wobblestick DN40CF

Product code: WMG40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV: 08.09.2014 JK


List price:

5'690.00 CHF

5'199.20 EUR*
6'313.10 USD*

Dual Shaft Wobblestick Wide Angle DN40CF

Product code: WMGWA40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.
WMGWA40 models feature an extra wide angular range of +/-28°.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 77mm), REV: 08.09.2014 JK


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2021 | © vogy GmbH 2021