Sign in

Dual Shaft Rotatable Sample Transporter with Slide Bearings DN40CF

Product code: RMJG40-XXXX-YYYY

The RMJG40 is a simple, all metal sealed, linear-rotary feedthrough with independent rotation of the inner as well as the outer shaft. It's main purpose is to transport samples between UHV-chambers. The independent rotary motion of each shaft enhances operation of sample locking mechanisms and sample carrier platforms by being able to drive and also rotate them.
Two sets of rare earth magnets on the air- and vacuumside provide the necessary force to ensure a rigid coupling from the handle to the shaft. Slide bearings for linear motion throughout guarantee for smooth operation even after numerous bakeout cycles.

Order code standard length
  • 300mm travel: RMJG40-0300-0050
  • 500mm travel: RMJG40-0500-0050
  • 750mm travel: RMJG40-0750-0050
  • 1000mm travel: RMJG40-1000-0050

Order code customized version:

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 45mm)

other dimensions on request

Options and accessories:

Image below: RMJG40-PGRMS(OMH), with optional PGRMS(OMH) pincer grip

Specifications: Dual Shaft Rotatable Sample Transporter with Slide Bearings DN40CF

linear travel X >= 50mm AND <= 1250mm; standard 0mm
retracted length Y >= 43mm AND <= 200mm; standard 50mm

  • linear travel: customised
  • retracted shaft length: customised (min. 43mm)
  • linear force: ~70N
  • torque: ~5Nm
  • bakeout temperature: 150deg C max.
  • pressure range 1E-11mbar to 1000mbar
  • high quality slide bearings
  • fully UHV compatible materials

RMJG40 - Drawing - PDF-File
RMJG40 - 3dxml-File
RMJG40 - 3D-Step-File


The following is a list of compatible options for RMJG40 Dual Shaft Rotatable Sample Transporter with Slide Bearings DN40CF.

List price:

450.00 CHF

396.86 EUR*
453.08 USD*

Upgrade to 200°C Bakeable Version of RMJG Dual Shaft (Double Rotary) Sample Transporters


Upgrade from 150°C to 200°C bakeout temperature for RMJG dual shaft rotary sample transporters with independant rotary motion of the inner as well as the outer shaft.

List price:

1'950.00 CHF

1'719.73 EUR*
1'963.35 USD*

Hard Grip Straight Pincer RM for SHOM Sample Plate

Product code: PGRMS(OMH)

Intended to pick up SHOM sample plates and move them with a transfer rod over larger distances typically from one UHV-chamber to another. For linear transfer motion and for all sample transporters, we recommend the PGRMS(OMH)-version: The sample plates are held with a clearance of +/-2° horizontal and vertical

REV: 07.09.16 JB

List price:

1'450.00 CHF

1'278.77 EUR*
1'459.93 USD*

Hexapod Port Aligner DN40CF for angular and lateral displacement

Product code: PA40HEX

Hexapod Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free inner diameter 38mm (if centered). Hexapod port aligners are especially sturdy and allow for adjustment of lateral as well as angular displacement.
REV 15.01.2014 UM

List price:

885.00 CHF

780.49 EUR*
891.06 USD*

Port Aligner DN40CF

Product code: PA40W

Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free bore 38mm

List price:

1'390.00 CHF

1'225.86 EUR*
1'399.52 USD*

Port Aligner DN40CF, both flanges tapped M6

Product code: PA40EC

Ultra compact port aligner DN40CF (2.75" OD), L=53mm +4mm/-11.3mm, free bore 38mm.
REV: 15.01.2014 UM

List price:

562.00 CHF

495.63 EUR*
565.85 USD*

Tube support with pivot mounted shafts OD 10mm

Product code: TSRMB

Two 10mm OD bars, support and protect the sample transporter.

List price:

1'025.00 CHF

903.96 EUR*
1'032.02 USD*

Tube support with pivot mounted shafts OD 16mm

Product code: TSRMBS

Two 16mm OD shafts support and protect the sample transporter.


List price:

425.00 CHF

374.81 EUR*
427.91 USD*

Guide Rail for RM and GMD Sample Transporters

Product code: TSRM

Guide Rail with OD 8mm for RM Sample Transporters

List price:

9'985.00 CHF

8'805.89 EUR*
10'053.36 USD*

Motorized linear and double rotary drive for RMDG / RMJG sample transporters

Product code: DRVRMOTLRR

2-axis motorized precision drive unit for RMDG or RMJG sample transporters. For automatic and reproducible extension and independent rotation of it's two shafts.

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | | | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018