Sign in

Customized Length Wide Angle Single Shaft Wobblestick DN40CF

Product code: WMWA40-XXXX-YYYY

The WMWA40 models feature an extra wide angular range of +/-28°. In order to use this extended deflection range, the WMWA wobblestick must be installed to a very short oversize tube. Special care has to be taken that the welded bellows and the shaft of the wobble stick do not strike the tube or chamber walls. If in doubt, please contact us for detailed information on this subject.

Order code: WMWA40-XXXX-YYYY

  • XXXX = linear travel in mm
  • YYYY = retracted shaft length in mm

Example: WMWA40-0180-0055 = Wide Angle Single Shaft Wobblestick DN40CF, 180mm linear travel, retracted shaft length 55mm.

Wobblestick accessories


Specifications: Customized Length Wide Angle Single Shaft Wobblestick DN40CF

linear travel X ≤ 600mm
retracted length Y ≥ 56mm AND ≤ 200mm; standard 74mm
adds 660.0 to dimension Z of the main product

  • linear travel: customized
  • retracted shaft length: customized
  • angular deflection +/-28° (see note 1)
  • linear force: 30N
  • torque: 0.5Nm
  • bakeout temperature: 150°C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

note 1: for full angular range, this wobblestick needs to be mounted to wobblestick flange
 

download drawing

download manual

Options

The following is a list of compatible options for WMWA40 Customized Length Wide Angle Single Shaft Wobblestick DN40CF.

List price:

988.00 CHF

824.30 EUR*
1'020.34 USD*

Grabber Tool ID 7mm for SHOM Plates

Product code: GRABSHOM7

Tool for grabbing and handling SHOM flag style sample plates, using a single shaft wobblestick.


List price:

250.00 CHF

208.58 EUR*
258.18 USD*

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled
REV. 24.5.2011 UM


List price:

290.00 CHF

241.95 EUR*
299.49 USD*

Inline Parking-/ Protection Rail for WM DN40CF

Product code: TSWMIL

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: inline
REV. 24.5.2011 UM


List price:

215.00 CHF

179.38 EUR*
222.04 USD*

Upgrade to 200°C Bakeable Version of Single Shaft Wobblesticks and Single L/R Feedthroughs

Product code: UPGRADEHB_MKS

Upgrade from 150°C to 200°C Bakeout Temperature for Single Shaft Wobblesticks and L/R Feedthroughs.


List price:

390.00 CHF

325.38 EUR*
402.77 USD*

Straight Fork for Block Style Holders

Product code: FRKBS

Straight fork for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm
REV 23.5.2011 UM


List price:

340.00 CHF

283.66 EUR*
351.13 USD*

Short Fork for Block Style Holders

Product code: FRKBSDM

Short fork without shaft for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm. M4 screw for direct installation.
REV 23.5.2011 UM


List price:

295.00 CHF

246.12 EUR*
304.66 USD*

Hex Key for Wobblestick

Product code: HEXKEY

This key can be used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal socket screws.
Available in both, metric and imperial type hex keys. Please specify key type and size upon ordering.
REV 23.5.2011 UM


List price:

295.00 CHF

246.12 EUR*
304.66 USD*

Hex Nut for Wobblestick

Product code: HEXNUT

Turns you wobblestick into an allen wrench. Used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal head screws.
Available in both, metric and imperial sizes. Please specify nut type and size upon ordering.
REV 23.5.2011 UM


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018