Sign in

Sample Plate for Direct Current Heating, with Central Opening for Optical Access from the Rear and Grounding Contact

Product code: SHOMDCRA(N)

For preparing semiconductor surfaces like the Si 7x7 reconstruction for instance, the best and most simple way is usually direct current heating. SHOMDC sample holders are made of Molybdenum and Al2O3. The sample is secured by two Mo strips.

For spectroscopy and STM experiments, this option, the SHOMDCRA(N) is recommended. With the SHOMDCRA(N), one side of the sample is permanently grounded with metallic (Mo) spacers instead of the ceramic ones the SHOMDC features.

RECOMDCRA provides the necessary receiver with isolated contact rails for attaching wires.

Specifications: Sample Plate for Direct Current Heating, with Central Opening for Optical Access from the Rear and Grounding Contact

  • minimum sample size (l x w x h): 8 x 1 x 0.2mm
  • maximum sample size (l x w x h): 11 x 3.5 x 0.5mm
  • material: Molybdenum, Al2O3
  • max. temperature: The maximum temperature depends on the material and shape of the actual sample
  • both contact rails electrically isolated by Al2O3 washers
  • one side of the sample permanently grounded with metallic (Mo) spacers
  • central opening for optical access from the rear

Download drawing (pdf)
3D-model available on request

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024