Sign in

Drawer Style Receivers for Flag Style Plates, Variable Temperature version, Molybdenum

Product code: RECOMLT(MO)

With it's melting point of 2900K, Molybdenum is an excellent choice of material for high temperature applications. At the other end, the high themal conductivity and the low expansion coefficient also make it an ideal choice for experiments at very low temperatures below 4K. 

Molydenum leaf springs press the sample plate down onto the face of the sample drawer via two Ruby spheres. For use above 1000K, it is strongly recommended not to use Mo sample plates. Very likely, the sample plates will be welded to the receiver. Choose tungsten, Tantalum or a ceramic material instead to avoid sticking.

Specifications: Drawer Style Receivers for Flag Style Plates, Variable Temperature version, Molybdenum

  • maximum temperature: ~2000K
  • minimum temperature: <4K
  • materials:
    • leaf spring: molybdenum & tungsten
    • housing: molybdenum
    • fasteners: tantalum
    • ruby spheres
  • fully UHV compatible

Do not use Molybdenum sample plates in this receiver at temperatures >1000K or welding may occur!

Downloads: drawing (pdf)  /  3D-model (stp) / thermal interface area (pdf)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024