Sign in

Motorized Linear Drive for Sample Transporter

Product code: DRVRMOTL-XXXX

The DRVRMOTL is a stepper motor-driven linear and manual rotary drive designed to operate sample transporters and optionally attached sample locking mechanisms such as a pincer grip. Compatible with RM40, RMHS40, RMJ40, RMD40, RMJG40 and RMDG40 sample transporters, it allows for manual rotation of the shaft for sensitive sample handling or when opening/closing the

Please note that this product is an optional accessory for sample transporters and cannot be retrofitted by yourself onto existing transporters. For retrofitting of an existing sample transporter, please get in touch with us. However, for bakeout procedures, the drive can be easily removed.

Pictured below: RM40-0500-0030-DRVRMOTL

RM40 sample transporter DN40CF with slide bearings and DRVRMOTL motorized linear drive

Specifications: Motorized Linear Drive for Sample Transporter

outer dimension X >= 95mm AND <= 1366mm; standard 0mm

System:

  • accuracy: ± 0,1mm / 300mm (encoded versions achieve higher resolutions)
  • toothed belt transmission for linear drive : 1:1
  • rotation effected manually (by hand) or blocked
  • linear unit has one adjustable (frontside) and one fixed end switch (backside, 0mm)

Downloads: drawing (pdf)  /  manual (pdf)

3D-model available on request

Stepper Motor Linear Drive:

  • Voltage: 8.8VDC
  • Amps/Phase: 2.0
  • Resistance/Phase: 8.8+/-10% Ohms
  • Holding torque: 1.32 Nm
  • Step angle: 1.8°+/-5%
  • controller not included

datasheet (pdf)

Spindle

  • linear drive spindle pitch: 3mm

Compatibility

The DRVRMOTL-XXXX Motorized Linear Drive for Sample Transporter suits the following products:

List price:

4'280.00 CHF

4'404.61 EUR*
4'778.12 USD*

Single Shaft Sample Transporter DN40CF

Product code: RM40-XXXX-YYYY

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation.

 


List price:

7'039.47 CHF

7'244.41 EUR*
7'858.74 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMD40-XXXX-YYYY

Vacuum-side-all-metal magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


List price:

8'728.95 CHF

8'983.08 EUR*
9'744.85 USD*

Dual Shaft Dual Rotary Sample Transporter

Product code: RMDG40-XXXX-YYYY

Vacuum-side-all-metal dual rotary magnetically driven dual shaft sample transporter with independent rotary motion of both, the inner and outer shafts.
Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft.


List price:

on request

Hollow Shaft Sample Transporter DN40CF with In-Vacuum Brake

Product code: RMHS40-XXXX-YYYY

Hollow shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation. Hollow Shaft sample tranporters are recommended for extra long vertical travel ranges up to 2300mm and includes an in-vacuum brake.


List price:

5'271.16 CHF

5'424.62 EUR*
5'884.63 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMJ40-XXXX-YYYY

Extra sturdy magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Slide bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection. Sapphire hybride bearings are guiding the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024