Sign in

UHV Booster CF40 flow through version with heating coil and temperature sensor

Product code: CTH40(WT)

A device to reduce painstaking waiting times for sample insertion into your system resulting in faster and more efficient work.

Our cold trap CTH40(WT) can be used in loadlock or small transfer chambers in conjunction with a turbo pump. It increases significantly the pump-down times and reduces the water partial pressure in the chamber.

Liquid nitrogen (LN2) flow through the tube cools down a cooling body to < -180°C within 10 min - 15 min. With this cryo pump the pump-down times are much shorter and an additional bake-out not necessary. The flow through version can be attached to a pressurized liquid nitrogen dewar or a cooling setup with a heat exchanger and nitrogen gas. In small chambers as e.g. the VSCT40 the pressure drops to 1E-8 mbar in approx. 30 min. opposed to several hours when using only turbo pumping.

Our new version has now an additional heating coil installed to achieve the same efficiency in fast warming of the cold trap. Via a Pt100 temperature sensor the temperature can be monitored at all times. Appropriate cabling can be ordered in addition to the cold trap. (No power supply or control electronics included.)

The CTH40 is available as stand-alone version or together with a small transfer chamber as VSCT40.

Some test data is shown here:

 

Specifications: UHV Booster CF40 flow through version with heating coil and temperature sensor

  • heat exchanger: Aluminium cooling blocks with OFHC core
  • pumpdown time (with VSCT40): approx. 30 minutes to a pressure of around 1E-8 mbar
  • cooling temperature cryo trap: 80K
  • built-in resistive heater for quick warm up
  • Pt100 temperature sensor
  • 6-pin miniature feedthrough
  • mounting flange: DN40CF (2.75")
  • feedthrough flange: DN16CF (1.33")
  • fully UHV compatible materials

Note: Cable with connector for cold trap heater must be ordered separately: CABCTH40HT3M

STEP-File Download

Manual (pdf)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024