Sign in

Single Shaft Wobblestick DN40CF

Product code: WM40-0100-0060

Magnetically driven single shaft wobblestick manipulator with mounting flange DN40CF.

Order code: WM40-0100-0060

Linear Travel 100mm, retracted shaft length 60mm, continuously rotatable.

For applications requiring higher torque and linear force refer to WM40HT.

Specifications: Single Shaft Wobblestick DN40CF

  • mounting flange: DN40CF
  • linear travel X = 100mm
  • rectracted length Y = 60mm
  • angular deflection +/-20 degrees (see note 1)
  • linear force: 30N
  • torque: 0.5Nm
  • bakeout temperature: 200 °C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible

note 1: if mounted to wobblestick flange

Options

The following is a list of compatible options for WM40-0100-0060 Single Shaft Wobblestick DN40CF.

List price:

988.00 CHF

899.82 EUR*
1'091.11 USD*

Grabber Tool ID 7mm for SHOM Plates

Product code: GRABSHOM7

Tool for grabbing and handling SHOM flag style sample plates, using a single shaft wobblestick.


List price:

250.00 CHF

227.69 EUR*
276.09 USD*

Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWM

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.
DN40CF bolt hole orientation: straddled


List price:

290.00 CHF

264.12 EUR*
320.27 USD*

Inline Parking-/ Protection Rail for Wobblesticks DN40CF

Product code: TSWMIL

External support and parking rail for wobblestick manipulators. Protects and supports wobblesticks while they are not in use.


List price:

295.00 CHF

268.67 EUR*
325.79 USD*

Bellows Protection for Wobblesticks

Product code: BP40

The BP40 enables angular movement of a wobblestick attached to flanges with tubes that have an inner diameter smaller than 40mm.


List price:

295.00 CHF

268.67 EUR*
325.79 USD*

Hex Key for Wobblestick

Product code: HEXKEY-M

This key can be used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal socket screws.
Available in both, metric and imperial type hex keys. Please specify key type and size upon ordering.


List price:

325.00 CHF

295.99 EUR*
358.92 USD*

Hex Nut for Wobblestick

Product code: HEXNUT

Turns you wobblestick into an allen wrench. Used in combination with WM40/WMWA40 wobblesticks for tightening/loosening in-vacuum hexagonal head screws.
Available in both, metric and imperial sizes. Please specify nut type and size upon ordering.
REV 23.5.2011 UM


List price:

390.00 CHF

355.19 EUR*
430.70 USD*

Straight Fork for Block Style Holders

Product code: FRKBS

Straight fork for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm
REV 23.5.2011 UM


List price:

340.00 CHF

309.65 EUR*
375.48 USD*

Short Fork for Block Style Holders

Product code: FRKBSDM

Short fork without shaft for SHBS sample holders 5x12x19.5mm or SHBS(5) 5x5x19.5mm. Pin separation distance = 12mm, Pin diameter = 1.6mm. M4 screw for direct installation.
REV 23.5.2011 UM


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2021 | © vogy GmbH 2021