Sign in
About usProjectsVacuum WizardReferencesPrivacy PolicyPublicationsContactJobs - offene Stellen (2)ManualsHome
Online catalogue and pricelistWobblestick Manipulators WMWobblestick Manipulators WMGWobblestick AccessoriesPGWMS(OM)
Straight Pincer for SHOM Flag Style PlatePGWMS(OMH)
Hard Grip Straight Pincer for SHOM Flag Style PlatesPGWMS
Basis Straight Pincer without GroovesPGWMSL(OM)
Long Straight Pincer for SHOM Flag Style PlatesPGWMSL(OMH)
Hard Grip Long Straight Pincer for SHOM Flag Style PlatesPGWMS(VGS)
Straight Pincer Grip for VG-Stub Sample HoldersGRABSHOM7
Grabber Tool ID 7mm for SHOM PlatesPGWMO(OM)
Orthogonal Pincer for SHOM Flag Style PlatesPGHFWMWAF
High Force Pincer for Wafer HandlingPGWMP(OMH)
Hard Grip Parallel Pincer for SHOM PlatesPGWMP(DC)
Parallel Pincer with Isolated JawsPGWMSJTAFM3
Pincer Grip for JT-STM V3PGWMSJTAFM4
Pincer Grip for JT-SPM V4PGWMS(OMUSLIMLTA)
Straight Pincer Ultra SLIM LT AFM for SHOMADOMO
Adapter for Omicron Pincer Grip SA02-1862 (STM1)ADOMO2
Adapter for Omicron PincerGrip GA02-1810/GA02-1119ADOMS
Adapter for Omicron Straight Pincer Grip GA02-182BP40
Bellows Protection for WobblesticksFRKBS
Straight Fork for Block Style HoldersFRKBSDM
Short Fork for Block Style Holders HEXKEY-M
Hex Key for WobblestickHEXNUT
Hex Nut for Wobblestick SERKWM40
Service Kit for WM40 with a 7mm shaftSERKWM40(S5)
Service Kit for WM40 with a 5mm shaftSERFCYWMG40
Factory change of retracted length for WMG40 WobblestickSERFWMG40
Factory overhaul of WMG40 WobblestickTSWM
Parking-/ Protection Rail for Wobblesticks DN40CFTSWMA
Aligner for Wobblesticks DN40CFTSWMDL(3)
Deflection Limiter (3deg) for Wobblesticks DN40CF TSWMF
Parking-/ Protection Rail for Wobblesticks DN40CF - also for non-horizontal usageTSWMIL
Inline Parking-/ Protection Rail for Wobblesticks DN40CFTSWMLR
Lock Ring for TSWM DN40CFTSWMPA
Tube Support for Wobblestick with angular alignment of the Wobblestick axisTSWMV
Parking-/ Protection Rail for WM DN40CF verticalADWMS5(M4I)
Adapter WM40 with D=5mm shaft from M3 to M4 internal threadADWMS7(M3I)
Adapter WM40 with D=7mm shaft from M4 to M3 internal threadADWMS7(M6I)
Adapter WM40 with D=7mm shaft from M4 to M6 internal threadADWMS7(S70L16PEEK)
PEEK Adapter for WM40, End Piece: D=7mm / L=16mmZLCF63CF40WM
Zero Length Reducing Flange CF63CF40 for WobblesticksLRMD
Lock Ring ID 11 for Linear/Rotary Feedthroughs & WobblesticksSample TransportersSample Transporter AccessoriesSample Transporter MotorizationLinear/Rotary FeedthroughsLinear/Rotary Feedthrough AccessoriesLinear/Rotary Feedthrough MotorizationRotary FeedthroughsSample HoldersSample Receivers and -CarriersPort AlignersFast Entry LocksCF-HardwareIn-Vacuum Connectors and WiringBall-BearingsCryo EquipmentSynchrotron/FEL InstrumentationUHV SuitcaseUHV Suitcase AccessoriesDocking SolutionsSpecial OffersEvaporation SourcesSample Heating StagesMultiaxis Boomerax ManipulatorsXY-ManipulatorsZ-ManipulatorsZ-Manipulator AccessoriesXY-Manipulators AccessoriesLaboratory EquipmentUHV-SystemsCF-FlangesPrecision Contract ManufacturingFastenersIn-Vacuum AccessoriesBakeout equipment

Parking-/ Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage

Product code: TSWMF-XXXX

Especially wobblesticks with longer travel ranges require special care to be taken so that the operators do not accidentally bend the tube while the wobblestick is not in use. The support is simply plugged into the flange of the wobblestick and pulled off during manipulation.

Protects and supports wobblesticks while they are not in use - also in non-horizontal usage.

Please note: Not compatible with standard Dual Shaft Wobblestick WMG40 with knob as actuator - only for WM40 or WMG40(FC) wobblesticks.

Left image: WM40-0100-0060-TSWMF
Single Shaft Wobblestick DN40CF with Protection Rail for Wobblesticks DN40CF


Specifications: Parking-/ Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage

support length X >= 0mm AND <= 500mm; standard 0mm

  • DN40CF bolt hole orientation: inline and outline possible
  • ideal for non-horizontal applications
  • 360° protection of wobblestick shaft

download drawing (pdf)

Compatibility

The TSWMF-XXXX Parking-/ Protection Rail for Wobblesticks DN40CF - also for non-horizontal usage suits the following products:

List price:

3'500.00 CHF

3'248.56 EUR*
3'801.04 USD*

Customized Length Single Shaft Wobblestick DN40CF

Product code: WM40-XXXX-YYYY

Magnetically driven single shaft wobblestick with mounting flange DN40CF.

XXXX: linear travel in mm / YYYY: retracted shaft length in mm (min. 42) REV 26.04.2014UM


List price:

5'090.00 CHF

4'724.34 EUR*
5'527.80 USD*

Customized Length Dual Shaft Wobblestick DN40CF

Product code: WMG40-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with mounting flange DN40CF.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV 26.08.2014 UM


List price:

5'390.00 CHF

5'002.78 EUR*
5'853.61 USD*

High Precision Actuator Dual Shaft Wobblestick DN40CF

Product code: WMG40(FC)-XXXX-YYYY

Magnetically driven dual shaft wobblestick manipulator with fine adjuster magnetic coupling.

XXXX: linear travel in millimeters
YYYY: retracted length, flange face to end of shaft in millimeters (min. 63mm), REV: 08.09.2014 JK


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2020 | © vogy GmbH 2020