Sign in

Pt100 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated

Product code: TMPTCR100S(500K)

This Pt100 sensor with extension wires cover a temperature range from approximately 15 K to 500 K. Each sensor is pre-installed on a spring-loaded mounting bracket and features 4-lead extension wires. The extension leads are low thermal loss, AWG 32 phosphor-bronze wires with polyimide insulation, supplied in a standard length of 500 mm. Custom lengths are available upon request. Four loose crimp socket connectors, suitable for 1.5–1.6 mm pin diameters, are included."

Specifications: Pt100 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated

  • Pt100 sensor, thin film technology on ceramics/glass substrate
  • Nominal resistance: 100 Ohm at 0°C
  • TCR: Pt 3850 ppm/K
  • ESD optimized design IEC/EN 61000-4-2
  • mounted to spring loaded copper bracket using Epotek H72 thermally conductive, UHV compatible epoxy
  • temperature range: ~15K to 500K (1), (2)
  • tolerance: IEC 60751 F 0.3 (0.12%)
  • cable length: 500mm (other lenghts upon request)
  • cable: 32 AWG Quad-LeadTM cryogenic wire, phosphorous bronze, polyimide insulation
  • four loose crimp sockets for pin dameter 1.5-1.6mm included
  • includes stainless steel screw M1.6 for mounting
  • fully UHV compatible

(1) Lowest measurable temperature strongly depends on measurement equipment. 

(2) Actual Sensor max temperature = 1123K. Useage temperature is limited by UHV-epoy and polyimide insulation.

Downloads: 3D-model (stp)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2026 | © vogy GmbH 2026