Sign in

Pt100 Sensor on Spring Loaded Mounting Bracket, 4-Wire Screw Terminal, uncalibrated

Product code: TMPTCR100S(1123K)

Pt100 sensors cover a wide temperature range from approximately 15 K to 1100 K. Each sensor is pre-installed on a spring-loaded mounting bracket and features a screw terminal for 4-lead extension wires. The extension leads can be chosen according to the application. For cryogenic use, we recommend 0.2mm daiameter low thermal loss, AWG 32 phosphor-bronze bare  wires isolated by ceramic tubes. 

Specifications: Pt100 Sensor on Spring Loaded Mounting Bracket, 4-Wire Screw Terminal, uncalibrated

  • Pt100 sensor, thin film technology on ceramics/glass substrate
  • Nominal resistance: 100 Ohm at 0°C
  • TCR: Pt 3850 ppm/K
  • ESD optimized design IEC/EN 61000-4-2
  • mounted to spring loaded copper bracket
  • temperature range: ~15K to 1123K (1)
  • tolerance: IEC 60751 F 0.3 (0.12%)
  • includes stainless steel screw M1.6 for mounting
  • includes a screw terminal for 2 or 4-lead wiring
  • recommended wiring: 32 AWG Quad-LeadTM cryogenic wire, phosphorous bronze, polyimide insulation
  • fully UHV compatible

(1) Lowest measurable temperature strongly depends on measurement equipment. 

Downloads: 3D-model (stp)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2026 | © vogy GmbH 2026