Sign in

Pt1000 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated

Product code: TMPTCR1000S(500K)

This Pt1000 sensor with extension wires covers a temperature range from approximately 15 K to 500 K. Each sensor is pre-installed on a spring-loaded mounting bracket and features 4-lead extension wires. The extension leads have low thermal loss, and AWG 32 phosphor-bronze wires with polyimide insulation are supplied at a standard length of 500 mm. Custom lengths are available upon request. Four loose crimp socket connectors, suitable for 1.5 - 1.6 mm pin diameters, are included."

Specifications: Pt1000 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated

  • Pt1000 sensor, thin film technology on ceramics/glass substrate
  • Nominal resistance: 1000 Ohm at 0 °C
  • TCR: Pt 3850 ppm/K
  • ESD optimized design IEC/EN 61000-4-2
  • mounted to a spring-loaded copper bracket using Epotek H72 thermally conductive, UHV-compatible epoxy
  • temperature range: ~15 K to 500 K (1), (2)
  • tolerance: IEC 60751 F 0.3 (0.12%)
  • cable length: 500 mm (other lengths upon request)
  • cable: 32 AWG Quad-LeadTM cryogenic wire, phosphorous bronze, polyimide insulation
  • four loose crimp sockets for pin diameter 1.5-1.6mm included
  • includes stainless steel screw M1.6 for mounting
  • fully UHV compatible

(1) Lowest measurable temperature strongly depends on measurement equipment. 

(2) Actual Sensor max temperature = 1123K. Useage temperature is limited by UHV-epoy and polyimide insulation.

Downloads: 3D-model (stp)

Compatibility

The TMPTCR1000S(500K) Pt1000 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated suits the following products:

List price:

on request

Adapter for Ferrovac SAE-Series to Lake Shore (Janis) ST400 Cryostat

Product code: ADCRHFST400SAE

This adapter enables the integration of Ferrovac SAE-Series Sample Environment modules with a Lake Shore (Janis) ST400 liquid helium flow cryostat. It provides a robust thermal and mechanical connection, ensuring compatibility between Ferrovac modules and the ST400 cryostat system.


List price:

on request

Sample Environment for Flag-Style Plates, Prepared for Razorbill UC220 Strain Device

Product code: SAECRNPUC220IF

Introduction

The SAECRNPUC220IF is a cryogenic sample environment module, optimized for low-temperature operation and prepared for direct integration with a Razorbill UC220T Stress/Strain devices for Transmission & Scattering measurements 


List price:

on request

Sample Environment Module for Flag-Style Plates – Optimized for Low Temperatures

Product code: SAECROM

This module provides a sample holder for standard flag-style plates, optimized for operation at the lowest achievable temperatures. Combined with the appropriate adapters, it is fully compatible with all Ferrovac Inserts for Boomerax manipulators, regardless of whether they are equipped with liquid nitrogen or liquid helium cooling.


List price:

on request

Sample Environment Module for Flag-Style Plates, Optimized for Low Temperatures with 13 Electrical Contacts

Product code: SAECROMEC13

The SAECROMEC13 is a sample environment module designed for standard flag-style plates, optimized for low-temperature operation. Featuring 13 electrical contacts, it enables reliable sample mounting, device wiring, and direct temperature measurement on the sample.


List price:

on request

Sample Environment for Flag-Style Plates, Adding Azimuthal Rotation Complete Package Including Rotator and Control Electronics

Product code: SAECROMROTANR240

Introduction

The SAECROMROTANR240IF is a cryogenic sample environment module for flag-style plates, optimized for low-temperature operation including an Attocube ANR240 UHV/RES/LT rotational nanopositioner. It enables azimuthal rotation of the sample when combined with a four-axis Boomerax manipulator.


List price:

on request

Sample Environment for Flag-Style Plates, Adding Azimuthal Rotation (Prepared for Attocube ANR240)

Product code: SAECROMROTANR240IF

Introduction

The SAECROMROTANR240IF is a cryogenic sample environment module for flag-style plates, optimized for low-temperature operation and prepared for direct integration with an Attocube ANR240 UHV/RES/LT rotational nanopositioner. It enables azimuthal rotation of the sample when combined with a four-axis Boomerax manipulator.


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2026 | © vogy GmbH 2026