Sign in

Pt1000 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated

Product code: TMPT1000S

A Pt1000 Sensor for easy and accurate temperature measurements in UHV from -200°C to 200°C. The sensor is glued onto a copper mounting bracket with a thermally conductive, UHV compatible epoxy resin (Epotek H72). Sensors can be mounted either plane-parallel for good thermal contact or in 90° geometry in case of limited space. It is fully UHV compatible and comes with AWG 32 poly-imide isolated phosphorous bronze  four-wire cabling with a standard length of 500mm. Four loose crimp socket connectors for pin diameter 1.5-1.6mm are included.

Specifications: Pt1000 Sensor on Support Piece with 4-Wire Cabling L=500mm, uncalibrated

  • Pt1000 sensor, thin film technology on ceramics/glass substrate
  • mounted to copper bracket using Epotek H72 thermally conductive, UHV compatible epoxy
  • temperature range: -200°C to 200°C
  • tolerance: IEC 60751 F 0.15
  • cable length: 500mm
  • cable: 32 AWG Quad-LeadTM cryogenic wire, phosphorous bronze, polyimide insulation
  • four loose crimp sockets for pin dameter 1.5-1.6mm included
  • fully UHV compatible

Downloads: Sensor Data Sheet (pdf)  /  Drawing (pdf)  /  3D Model (stp)

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024