Sign in

Sample Environment Module for Flag-Style Plates, Optimized for Low Temperatures with 13 Electrical Contacts

Product code: SAECROMEC13

Product Description

The SAECROMEC13 builds on Ferrovac’s proven RECOMCREC13 sample receiver design, providing a high-performance cryogenic interface for electrically contacted samples. In combination with the SHOMEC13 sample carrier, users can wire up devices and integrate a temperature sensor directly on the sample for precise thermal characterization.

The integrated RECOMCREC13 receiver features a clamping mechanism operated by the sample exchange tool, pressing the sample firmly against the cold base plate for optimal cooling performance.

The SAECROMEC13 includes the standardized SAE mechanical interface on one side, allowing easy attachment to a cryostat using the ADCRHFST400SAE adapter. For stacking a second Sample Environment module, the ADCRSAESAE Stacking Adapter is required.

The SAECROMEC13 is equipped with a rear access port, allowing optical access to the back side of the sample surface. This makes the module suitable for transmission experiments and other applications requiring direct illumination or detection from the rear.

By default, the module is equipped with a TMPTC100S(500K) platinum resistor temperature sensor. Other sensor options are available on request, including Pt100, Pt1000, Cernox, temperature measurement diodes, and thermocouples.

The unit is supplied pre-wired with 13 coaxial 50 Ω/m PFA-insulated cables and four wires for four-lead temperature measurement, all terminated with 1 mm crimp pins compatible with the 24-pin in-vacuum connector of standard Boomerax manipulator inserts (INCF).

Specifications: Sample Environment Module for Flag-Style Plates, Optimized for Low Temperatures with 13 Electrical Contacts

SAECROMEC13 – Sample Environment Module for Flag-Style Plates (13 Electrical Contacts)

Low-temperature sample environment based on the proven RECOMCREC13 sample receiver with 13 electrical contacts. Use with the SHOMEC13 carrier to wire devices and integrate a sensor for direct on-sample temperature measurement.

Key Features

  • Integrated clamping mechanism (operated by the exchange tool) presses the sample onto the cold base plate for optimal cooling
  • Standardized SAE mechanical interface on one side for easy cryostat attachment
  • Pre-wired for rapid setup: 13 signal lines + 4 temperature-sense wires
  • Optical Access: Rear access to the sample surface for transmission experiments

Compatibility

  • Cryostat Attachment: via ADCRHFST400SAE adapter
  • Stacking Multiple Environments: requires ADCRSAESAE Stacking Adapter
  • Sample Receiver: RECOMCREC13 (13 contacts)
  • Sample Carrier: SHOMEC13

Temperature Sensing

  • Standard Sensor: TMPTC100S(500K) platinum resistor
  • Optional Sensors: Pt100, Pt1000, Cernox, temperature measurement diodes, thermocouples

Electrical Wiring

  • 13 × coaxial cables, 50 Ω/m, PFA insulated
  • 4 × wires for four-lead temperature measurement
  • Termination: 1 mm crimp pins compatible with 24-pin INCF in-vacuum connector (Boomerax manipulator inserts)

Materials

  • Housing, sample drawer, cable channel: Oxygen-free copper (CW 2.0040A), gold-plated
  • Electrical isolators: Sapphire, Al2O3
  • Leaf springs: Molybdenum
  • Screws: Stainless steel A2 (optional non-magnetic version available)

Product Code

SAECROMEC13

Options and Accessories

List price:

on request

SAE Stacking Adapter for Multiple Sample Environment Modules

Product code: ADCRSAESAE

The SAE Stacking Adapter enables the combination of two or more Ferrovac Sample Environment modules into a single configuration. It provides the standardized mechanical interface required for precise and stable module stacking.


List price:

6'350.00 CHF

7'041.00 EUR*
8'381.62 USD*

Cryo Sample Holder Drawer with 13 electrical Contacts

Product code: RECOMCREC13V2

Cryo-Receiver for flag style sample plates with 13 electrical contacts and locking mechanism.
Release V2 can be installed in arbitrary orientation. A lever mechanism presses the sample plate tightly to a cooling surface for cryogenic applications.
Accepts
SHOMEC13 and all other SHOM standard flag style holders.


List price:

535.00 CHF

593.22 EUR*
706.17 USD*

Pt1000 Sensor on Spring Loaded Mounting Bracket, 4-Wire Cabling L=500mm, uncalibrated

Product code: TMPTCR1000S(500K)

Fully UHV-compatible Platinum 1000 temperature sensor, designed to operate across a temperature range from ~15 K to 500 K. The sensor is installed on a spring-loaded mounting bracket and equipped with low thermal loss, polyimide-insulated phosphor-bronze 4-lead extension wires - ideal for cryogenic applications.


List price:

2'300.00 CHF

2'550.28 EUR*
3'035.86 USD*

Sample Holder 13 Electrical Contacts Molybdenum including temperature sensor

Product code: SHOMEC13(MO-DT)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. With pre-installed lake shore DT-670 silicone diode temperature sensor.


List price:

1'700.00 CHF

1'884.99 EUR*
2'243.90 USD*

Sample Holder out of Molybdenum with 13 Electrical Contacts

Product code: SHOMEC13(MO)

Flag style sample holder with 13 electrical spring contacts and three slits for kinematic snap-in. Compatible with standard sample transfer systems for flag style holders. This product requires a RECOMEC13 sample receptor assembly.

Materials: Molybdenum, Beryllium-Copper, Stainless Steel. Isolators: shapal M


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2026 | © vogy GmbH 2026