Sign in

Dual Shaft Dual Rotary Sample Transporter DN40CF

Product code: RMJG40-XXXX-YYYY

Dual rotary sample transporters are designed to accept active end effectors such as pincers, wafer lifting gear or rotatable sample platforms. Installed end effectors are driven by turning one air-side magnet against the other. Turning both magnets simultaneuosly rotates the end effector around the linear axis.

Two sets of rare earth magnets on the air- and vacuumside provide the necessary force to ensure a rigid coupling from the handles to the shafts. The outer shaft is guided by silde bearings, while the inner shaft is held by sapphire hybride ball bearings.

  • Standard strokes: 0500 / 0750 / 1000 / 1250mm
  • Standard retracted length: 0050mm
  • Customized stroke: Specify XXXX min. 50mm / max. 1250mm
  • Customized retracted length: Specify YYYY min. 45mm / max. 200mm

Standard example: RMJG40-0500-0050 = Dual Shaft Dual Rotary Sample Transporter DN40CF, 500mm linear travel,  50mm retracted shaft length.

Customized Example: RMJG40-0650-0100 = Dual Shaft Dual Rotary Sample Transporter DN40CF 650mm linear travel, 100mm retracted shaft length.

RMJG40 compatible options and accessories: See below.

Image on bottom right: RMJG40-PGRMS(OMH), with installed PGRMS(OMH) pincer grip

Specifications: Dual Shaft Dual Rotary Sample Transporter DN40CF

linear travel X >= 50mm AND <= 1250mm; standard 0mm
retracted length Y >= 43mm AND <= 200mm; standard 50mm

  • linear force: 70N
  • torque: 5Nm
  • bakeout temperature: 200 °C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

Downloads:  drawing (pdf)  |  3D-model (stp)  |  manuals

Options and Accessories

List price:

2'196.32 CHF

2'275.11 EUR*
2'448.14 USD*

Pincer for Flag Style Plates

Product code: PGRMS(OMH)

As an accessory to our dual shaft sample transporters, this pincer is used to handle standard flag style sample plates.

List price:

2'725.68 CHF

2'823.46 EUR*
3'038.19 USD*

Gear Driven Rotatable Storage Platform for 4 flag style plates

Product code: RSCRMJ4OM

A set of gears driven by the inner shaft of a dual sample transporter provides for azimuthal rotation of the storage- and transfer platform. The platform accepts up to four commonly used flag style plates.

List price:

4'635.00 CHF

4'801.27 EUR*
5'166.42 USD*

Pincer for Wafer Handling

Product code: PGRMWAF

High force pincer for direct gripping of 2"... 6" wafers. To protect the wafer and for a secure grip, the jaws are equipped with FKM-O-rings.

List price:

1'633.16 CHF

1'691.75 EUR*
1'820.41 USD*

Hexapod Port Aligner DN40CF for angular and lateral displacement

Product code: PA40HEX

Hexapod Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free inner diameter 38mm (if centered). Hexapod port aligners are especially sturdy and allow for adjustment of lateral as well as angular displacement.

List price:

1'109.42 CHF

1'149.22 EUR*
1'236.62 USD*

Port Aligner DN40CF

Product code: PA40

Port aligner DN40CF (2.75" OD), L=90 +/-5mm, free bore 38mm

List price:

Port Aligner DN40CF, both flanges tapped M6

Product code: PA40EC

Ultra compact port aligner DN40CF (2.75" OD), L=53mm +4mm/-11.3mm, free bore 38mm.

List price:

892.04 CHF

924.04 EUR*
994.32 USD*

Tube support with pivot mounted shafts OD 10mm

Product code: TSRMB

Two left/right treaded 10mm OD bars to support and protect the sample transporter.

List price:

1'368.47 CHF

1'417.56 EUR*
1'525.37 USD*

Extra-Sturdy tube support with pivot mounted shafts OD 16mm

Product code: TSRMBS

Two left/right threaded 16mm OD shafts to support and protect your sample transporter. Recommended for sample transporters with a travel range >=750mm


List price:

11'246.26 CHF

11'649.69 EUR*
12'535.68 USD*

Motorized Linear and Double Rotary Drive for Dual-shaft Sample Transporter

Product code: DRVRMOTLRR

3-axis motorized precision drive unit for RMDG or RMJG sample transporters. For automatic and reproducible extension and independent rotation of it's two shafts.

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024