Sign in

Cryo Sample Receiver with 13 electrical Contacts

Product code: RECOMCREC13

Common flag style holders do not reproducibly snap into position, nor do they have electrical contacts. With this design, we are adding the possibility of wiring up devices on flag style holders to up to 13 electrical contacts.
This particulair version is optimized for cryogenic applications.
The receiver is equipped with a pressure plate that can be screwed tightly to the sample plate using the pincer on the wobblestick usually present to handle the sample. By tightening the screw, an angled surface presses onto the side of the sample plate, forcing it down.
An improved  thermal contact to the cooling surface is achieved and the temperature difference between the sample and the receiver is only about 2 Kelvin, as shown in the document "Thermal Conductance Datasheet" below.

Please contact us for a detailed discussion of your requirements.


Reference Systems:

Specifications: Cryo Sample Receiver with 13 electrical Contacts

Specifications:

  • Number of contacts: 13
  • Materials:
    • Positioning spheres: ruby
    • Shield cap: gold plated 2.1247 CuBe2, Gold plated over Ni-P, nonmagnetic
    • Springs: 1.4571 stainless steel
    • Cooling body: 2.0040 oxygen-free copper, Gold plated over Ni-P, nonmagnetic
    • Housing: 1.4301 CuBe2 Gold plated over Ni-P, nonmagnetic
    • Isolators: PEEK
    • Contacts: CuBe2, Gold plated over Ni-P, nonmagnetic
    • Screws: stainless steel grade A2 or higher
  • Max. temperature: 250°C
  • Accepts SHOMEC13(MO) and SHOMEC13(MO-DT) flag style sample plate assembly as well as all common flag style plates without electrical contacts.
  • Wiring not included - factory wiring with a preconfigured set of cables is highly recommended!

Loading/unloading of the sample and operation of the locking screw requires a WMG40 dual shaft wobblestick with PGWMS(OM) pincer for flag style plates. The use of a WM40 single shaft wobblestick with GRABSHOM sample grabber is not recommended.

Mounting orientation must be strictly horizontal with the sample surface facing upwards!

download drawing (pdf)

download 3D model (stp)

download thermal conductance datasheet (pdf)

Compatibility

The RECOMCREC13 Cryo Sample Receiver with 13 electrical Contacts suits the following products:

List price:

1'430.00 CHF

1'289.80 EUR*
1'531.71 USD*

Straight Pincer for SHOM Flag Style Plate

Product code: PGWMS(OM)

Standard clearance, sample play of +/-8°.


Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2021 | © vogy GmbH 2021