Sign in

Port Aligner DN63CF

Product code: PA63

Edge welded bellows port aligner with pivot mounts.

Three left/right threaded hex nuts allow for angular as well as linear adjustment. The alignment screws are equipped with pivot mounts on one end and bolted to the CF-Flange on the other end.

Both flanges are DN63CF with through holes.

A simple device used for angular alignment of UHV equipment.

Specifications: Port Aligner DN63CF

  • Flanges: DN63CF (4.5" OD), through holes
  • Insertion length: 100 +/-5mm
  • Free bore: 65mm
  • Angular deflection: +/-5°
  • Maximum bakeout temperature: 200°C

download drawing

download 3D-model in STEP format (zipped)

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | | | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2020 | © vogy GmbH 2020