Sign in

Hexapod Port Aligner DN40CF for angular and lateral displacement

Product code: PA40HEX

Hexapod geometry for full degree of freedom:

  • lateral axis displacement
  • length adjustment
  • angular adjustment

This port aligner has six alignment screws instead of the usual three. Left/right threaded hexnuts allow for angular, linear and lateral (off axis) adjustment. The alignment screws are equipped with pivot mounts on both ends. The hexagonal geometry adds additional sturdyness.

Application example: A sample transporter axis needs to be aligned to two points of sample interchange, i.e. a given point of interchange in a chamber A must be aligned with a specific point of interchange in chamber B.

Specifications: Hexapod Port Aligner DN40CF for angular and lateral displacement

  • flange 1: DN40CF (2.75" OD), rotatable, through holes
  • flange 2: DN40CF (2.75" OD), through holes
  • installation length: 90mm, +/-5mm
  • lateral range: +/-5mm
  • angular range: +/-5deg
  • free bore: 38mm
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials
  • max. bakeout temperature 200°C

Downloads: drawing (pdf) | 3D-model (stp) | manuals

Compatibility

The PA40HEX Hexapod Port Aligner DN40CF for angular and lateral displacement suits the following products:

List price:

2'274.74 CHF

2'447.01 EUR*
2'720.33 USD*

Linear/Rotary Feedthrough DN40CF

Product code: MD40-XXXX-YYYY

Magnetically driven single shaft linear/rotary feedthrough with mounting flange DN40CF.


List price:

3'384.21 CHF

3'640.50 EUR*
4'047.13 USD*

High-torque Linear/Rotary Feedthrough

Product code: MD40HT-XXXX-YYYY

High-torque magnetically-driven single shaft linear/rotary feedthrough with mounting flange DN40CF.
 


List price:

4'280.00 CHF

4'604.13 EUR*
5'118.39 USD*

Single Shaft Sample Transporter DN40CF

Product code: RM40-XXXX-YYYY

Magnetically driven single shaft sample transporter with mounting flange DN40CF. Built with superior slide bearing technology for long-lifetime and smooth operation.

 


List price:

7'039.47 CHF

7'572.58 EUR*
8'418.40 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMD40-XXXX-YYYY

Vacuum-side-all-metal magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


List price:

8'728.95 CHF

9'390.01 EUR*
10'438.83 USD*

Dual Shaft Dual Rotary Sample Transporter

Product code: RMDG40-XXXX-YYYY

Vacuum-side-all-metal dual rotary magnetically driven dual shaft sample transporter with independent rotary motion of both, the inner and outer shafts.
Sapphire hybride ball bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection as well as the inner shaft.


List price:

5'271.16 CHF

5'670.35 EUR*
6'303.71 USD*

Dual Shaft Single Rotary Sample Transporter

Product code: RMJ40-XXXX-YYYY

Extra sturdy magnetically driven dual shaft sample transporter with independent rotary motion of the inner shaft. Slide bearings for extra durability and smooth operation are guiding a tubular outer shaft with a square crossection. Sapphire hybride bearings are guiding the inner shaft. Recommended for travel ranges >750mm and for heavier loads.


List price:

6'226.27 CHF

6'697.79 EUR*
7'445.91 USD*

Dual Shaft Dual Rotary Sample Transporter DN40CF

Product code: RMJG40-XXXX-YYYY

Magnetically driven sample transporter with independent rotary motion of the inner as well as the outer shaft. Slide bearings for linear motion, sapphire hybrid bearings for inner shaft. Throughout guarantee for long-lifetime and smooth operation even after numerous bakeout cycles.


Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024