Sign in

E-Beam Heating Station (P) for Flag Style Plates

Product code: HSASOM40(EB)P-YYYY

Composed of an E-Beam heating stage for SHOM samle holders, this fully configured assembly is completely mounted on a DN40CF (2.75") flange, including wiring and electrical feedthroughs.

This provides complete and customizable, ready to use solution for sample heating/ annealing under UHV conditions up to 2000°C.

Specifications: E-Beam Heating Station (P) for Flag Style Plates

retracted length Y >= 100mm AND <= 400mm; standard 172mm

  • Distance from flange face to center (or surface) of sample plate: customized.
  • Receiver orientation: P (flag perpendicular to axis)
    • Other options:
      • PS (flag perpendicular to axis, straight)
      • N (flag in-line with axis)
  • Temperature range: RT ~ 2000°C
  • Completely mounted on DN40CF-flange, incl. wiring and electrical feedthroughs.
  • MS type air side connector included.
  • SHV type air side connector included
  • fully UHV compatible materials
  • Controller not included

Downloads:  drawing (pdf)  /  3D model (stp)  / manual (pdf)

There is no thermocouple included in this standard version. The thermocouple would be in physical/electrical contact with the sample plate. Therefore, if high sample bias voltages are applied via the ‘sample bias’ feed-through, the thermocouple connector must be disconnected unless you are using a measuring device that can cope with the bias voltage being applied.

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2023 | © vogy GmbH 2023