Sign in
HomeProjectsReferencesPrivacy PolicyPublicationsContactManuals
Online catalogue and pricelistWobblestick Manipulators WMWobblestick Manipulators WMGPincers and Grippers Wobblestick AccessoriesSample TransportersSample Transporter AccessoriesSample Transporter MotorizationDRVRMOTL
Motorized Linear Drive for Sample TransporterDRVRMOTLR
Motorized Linear and Rotary Drive for Sample TransporterDRVRMOTLRR
Motorized Linear and Double Rotary Drive for Dual-shaft Sample TransporterRM40-0500-0030-DRVRMOTL
Sample Transporter with Motorized Linear DriveRMDG40-XXXX-YYYY-DRVRMOTLRR-PGRMS(OMH)
Dual Shaft Sample Transporter with Motorized Linear and Double Rotary Drive and PGRMSLinear/Rotary FeedthroughsLinear/Rotary AccessoriesLinear/Rotary MotorizationRotary FeedthroughsPort AlignersSample HoldersSample Receivers and -CarriersSample Heating StagesVacuum ChambersUHV SuitcaseUHV Suitcase AccessoriesUHV Suitcase Docking SystemsLoad Lock SystemsNEG-ION pumpsLaboratory EquipmentCryo EquipmentMultiaxis Boomerax ManipulatorsXY-ManipulatorsXY-Manipulators AccessoriesZ-ManipulatorsZ-Manipulator AccessoriesIn-Vacuum Connectors and WiringFastenersBall-BearingsCF-Cubes and -Components

Sample Transporter with Motorized Linear Drive

Product code: RM40-0500-0030-DRVRMOTL

The RM40-DRVRMOTL is a linear-rotary feedthrough for ultra high vacuum applications, equipped with a stepper motor-driven one axis linear actuator. The motorized spindle drive is coupled to the air side magnet of the RM40 and controls the linear motion of the inner shaft. The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

Slide bearings guarantee for smooth operation of the sample transporter even after numerous bakeout cycles.

Please note that for bakeout the drive must be removed.

Video

Specifications: Sample Transporter with Motorized Linear Drive

Sample Transporter DN40CF

  • linear travel: 500mm
  • retracted shaft length: 30mm
  • linear force: ~70N
  • torque: ~5Nm
  • bakeout temperature: 200 °C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

 

System:

  • accuracy: ± 0,1mm / 300mm
  • toothed belt transmission for linear drive : 1:1
  • rotation effected manually (by hand) or blocked
  • linear unit has one adjustable (front end) and one fixed end switch (rear end, 0mm)

Downloads: drawing (pdf) | manuals

3D-model available on request

Stepper Motor Linear Drive:

  • Voltage: 8.8VDC
  • Amps/Phase: 1.0
  • Resistance/Phase: 8.8+/-10% Ohms
  • Holding torque: 1.32 Nm
  • Step angle: 1.8°+/-5%
  • controller not included

Download Datasheet

Spindle

  • linear drive spindle pitch: 3mm

Possibly an end-user certificate (EUC) is required from purchaser.
Export licence from the State Secretariat for Economic Affairs (SECO) or Swiss Federal Office of Energy (SFOE) may be required

Ferrovac AG | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | link? | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac AG 2024 | © vogy GmbH 2024