Sign in

Motorized Linear and Rotary Manipulator DN40CF

Product code: MD40-XXXX-YYYY-DRVMDMOTLR

The MD40-DRVMDMOTLR is a linear/rotary feedthrough, equipped with a motorized two axis actuator. It's Nanotec ST2018L0804 2-phase stepper motor-driven high precision spindle drive is coupled to the outer magnet and controls linear motion. With a 2mm pitched spindle, a readout of 0.05mm is possible. Alternatively, a 1mm pitched spindle provides even higher resolution.

Rotation of the shaft is activated via the gearbox of a second stepper motor.
The sturdy linear unit ensures unchanging alignment of all components and consistent positioning.

 

Order code:
  • MD40-0100-0030-DRVMDMOTLR
  • MD40-0150-0030-DRVMDMOTLR
  • MD40-0200-0030-DRVMDMOTLR
Options and accessories:

 

 


Specifications: Motorized Linear and Rotary Manipulator DN40CF

MD40-DRVMDMOTLR Linear/Rotary manipulator with motorized precision drive

  • linear drive unit DRVMD: 2mm or 1mm pitched spindle drive
  • linear travel: 100mm, 150mm or 200mm
  • mounting flange DN40CF (2,75" O.D.)  → also available with DN16CF (1.33" O.D.) or DN63CF (4,5" O.D.)
  • linear force: 30N
  • torque: 0.5Nm
  • bakeout temperature (without stepper motor): 150deg C max.
  • pressure range 1E-11mbar to 1000mbar
  • fully UHV compatible materials

Download drawing

3D-model available on request

Stepper Motor Linear Drive:

  • Voltage: 3.22
  • Amps/Phase: 1.4
  • Resistance/Phase: 2.3+/-10% Ohms
  • Holding torque: 0.117 Nm
  • Step angle: 1.8°+/-5%

Download Datasheet

Stepper Motor Rotary Drive:

  • Voltage: 4.8 VDC
  • Amps/Phase: 0.8
  • Resistance/Phase: 6.0+/-15% Ohms
  • Holding torque: 0.036 Nm (without worm gear unit)
  • Step angle: 1.8°+/-5%

Download Datasheet

Ferrovac Gmbh | Thurgauerstrasse 72 | CH-8050 Zürich | www.ferrovac.com | sales@ferrovac.com | TEL +41 44 273 16 38 | FAX +41 44 273 16 30
© Ferrovac GmbH 2018 | © vogy GmbH 2018