Radiant Heater for Flag Style Sample Plates
Product code: HSASM40-MD16(TS)-TSMDH-HSOMRAD(PR)-XXXX-YYYY
Composed of a HSOMRAD(PL) Sample Heating Stage clamped on an MD16 or MD40 Linear/Rotary Feedthrough, this configured assembly is completely mounted on a DN40CF-flange, including wiring and the electrical feedthrough.
It is intended for the preparation of SHOM flag style sample plates.
Maximum operating temperature is limited to approximately 1000°C and can be measured with the included type K thermocouple.
With this (PR) version, the sample plate is inserted/retracted from the right. For access from the front or other side, please see:
HSOMRAD(PS) - access from the front
HSOMRAD(PL) - access from the left
Specifications: Radiant Heater for Flag Style Sample Plates
linear travel: ≤ 160mm
retracted length: ≥ 140mm AND ≤ (300mm - linear travel); standard 150mm
- Heating: up to approx. 1000°C
- Resistance at 1000°C: approx. 11Ω
- Max. Current: 7A
- Wattage: 100W
- Thermocouple: Type K
- fully UHV compatible materials
- min. retracted length depend on linear travel
- Controller not included
3D-model available on request