Intelligent LED Chamber Ring Light on Adapter for DN40CF
Product code: ADLED40
The ADLED40 chamber light with it's 16 individually controllable RGB LEDs is designed for tailored illumination inside UHV chambers. Furthermore it facilitates viewing through the very viewport it is attached to.
Offering high brightness, a no noise, non-flickering operation and low energy consumption it also allows for the full spectrum of (RGB) colours to be set at your convenience for specifically targeted lighting of your chamber.
Fixed to an adapter for DN40CF, it's LEDs guarantee extended operational life, reducing the need for costly replacement of lamps, often associated with other types of lighting. Power the whole ring with 5VDC (4-7V works) and you're ready.
There is a single data line with a very timing-specific protocol. This means it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the Netduino or Basic Stamp. A controller from Ferrovac will be available soon.
Specifications: Intelligent LED Chamber Ring Light on Adapter for DN40CF
- LED Count: 16 LEDs
- LEDs individually controllable, all (RGB) colours configurable
- Quick On/Off - almost immediate operation
- Peak power use: approx. 5 Watts
- Luminous intensity:
- Red = 550-700mcd/LED
- Green =110-1400mcd/LED
- Blue = 200-400mcd/LED
- Working Voltage: 5VDC
- controllable with single data line with a very timing-specific protocol
- Hertz: approx. 400KHz
- Controller not included